WEDGE DART PLANE

step 1.
Fold the paper vertically (length wise) and
then un-fold it to make a crease up the middle..

step 2. 

Fold the outer corners into the center crease. This is how a lot of these Fold n' Fly models start out..

step 3.

Fold the triangular top down as shown.

step 4. 

Fold the upper corners down with the corners meeting on the crease line. After this fold the airplane back on itself as shown in STEP 5

step 5.

Plane is folded back on itself..

step 6.

Next we need to make the Wedgie's wings. Simply fold  the top edges down

step 7.
With the wings ice and horizontal, staple the fuselage together anywhere along the fuselage.. Then to give your model a good serious ballast in the nose, a small paper clip is jsut the ticket..

The great feature of the 'dart wedge' is that the flying surfaces are so easy to adjust. If the model dives, bend the trailing surface upward just a tab and watch it stretch out that glide..

Basic paper plane model

1. step 1

make a mark about an angle of 45 degree in a A4 for any rectangular sheet like shown in figure

2. Step 2

after folding as in step 1... now do one more cross fold about 30 degrees and ake one more folding

3. step 3

bend as per step 1 and step 2... you will get a pyramid shape compressed type,,, now you are closer to finish your basic paper plane

4. Step 4

cross bend the folded paper plane as shown in figure... now your fllight is ready but important thing wing is missing... now its time to add an wing and make our plane to fly...

5. Step 5

make a wing by folding the fuselage(main body) of our paper plane...

now you have successfully made your basic paper plane...fly in air and find how much distance it covers,,,

bigger your Paper plane wings,, more your stability and Range...

technical details will be posted on next blog ...

thank you